########
Hardware
########

Materialliste
=============

Copied from Nextcloud to have it all in one place. Definitely TODO!

Hannover
--------

- HP Z230 Tower Workstation (pbs.falken-niedersachsen.de)
    - runs: Proxmox Backup Server (PBS)
    - RAM: 16 GB DDR3 ECC 1600 MHz
    - Speicher:
        - Onboard RAID Controller (Windows only)
        - 2x 10TB HDD
        - ZFS Software RAID (mirror)
    - Prozessor: Intel Xeon E3-1225V3 SR20N 4 Cores
    - Network: 1Gbit/s dual port Network Card
- EATON Ellipse ECO USV
    - Stecker-Ports: 4
    - 400 Watt
    - kein USB :(
- Fritzbox
    - trash (Stand 3.Juni 2021)

Braunschweig
------------

- Dell PowerEdge r720xd (pve.falken-niedersachsen.de)
    - runs: Proxmox Virtual Environment (PVE)
    - Speicher:
        - Dell PERC H710 D1 (non-blade) Storage Controller („Integrated RAID“)
            - Reflashed mit LSI 2107 IT mode firmware (siehe Anleitung)
            - Runs in HDA pass-through mode for ZFS
        - 4x 3TB HDD (raidz1), 1x 1 TB HDD (etx4, mounted)
        - 2x 960 GB SSD (Samsung SM883, 2,5", SATA, zfs mirrored)
        - Einbaurahmen fehlt einmal!
    - iDRAC
    - Network:
        - Daughter NIC Intel X540-T2 Converged Ethernet 2x 10Gbit/s
        - Dell Daughter NIC Intel i350-T4 4x 1Gbit/s
    - RAM: 128 GB DDR3 ECC 1600 MHz
    - Prozessor: Intel Xeon E5-2697V2 SR19H 2x 12 Core 2,7 GHz
- Switch Model: D-LINK 5GS
    - Farbe: Schwarz
    - Ports: 24
    - unused
- EATON Elipse ECO USV
    - Stecker-Ports: 4
    - 400 Watt
    - kein USB :(
- Fritz!Box 7590

RAID Controller Flash
~~~~~~~~~~~~~~~~~~~~~

The Dell PERC H710 D1 (non-blade) Storage Controller in the main server in Braunschweig has been reflashed to the LSI 2107 IT mode firmware to allow for HDA pass-through in oder to support ZFS on a RAID controller.

We followed these instructions: https://fohdeesha.com/docs/H710-D1.html (`Web Archive <https://web.archive.org/web/20211115154737/https://fohdeesha.com/docs/H710-D1.html>`__)

This article can also be of help: https://dan.langille.org/2020/10/07/dell-r720-flashing-dell-perc-h710-mini-into-it-mode/


OpenManage Server Administrator (OMSA)
======================================

Dell Servers have a tool to check on the hardware status in a lot of detail, the OMSA. TO use it, it needs to be installed on the host. Sadly it is not (offically) supported for Debian Buster, so some trickery is needed.

Installation
------------

I used these tips: https://www.mail-archive.com/linux-poweredge@dell.com/msg05172.html
To follow these instructions: https://linux.dell.com/repo/community/openmanage/ (They are for ubuntu, but work fine)

.. code-block:: console

    [root@pve: ~] $ gpg --keyserver pool.sks-keyservers.net --recv-key 1285491434D8786F
    [root@pve: ~] $ gpg -a --export 1285491434D8786F | apt-key add -
    [root@pve: ~] $ echo 'deb http://linux.dell.com/repo/community/openmanage/940/bionic bionic main' > /etc/apt/sources.list.d/linux.dell.com.sources.list
    [root@pve: ~] $ apt install libcurl3 srvadmin-base srvadmin-cm srvadmin-deng srvadmin-deng-snmp srvadmin-omacore srvadmin-omacs srvadmin-omcommon srvadmin-omilcore srvadmin-ominst srvadmin-server-cli srvadmin-smcommon srvadmin-xmlsup
    [root@pve: ~] $ systemctl start dsm_sa_datamgrd && systemctl start dsm_sa_eventmgrd
    [root@pve: ~] $ ln -s /opt/dell/srvadmin/bin/omreport /usr/local/sbin/omreport
    [root@pve: ~] $ omreport -? # Check installation

Power Management
----------------

Read out energy consumption since last reset:

.. code-block:: console

    omreport chassis pwrmonitoring

Reset energy consumption reading:

.. code-block:: console

    omconfig chassis pwrmonitoring config=resetreading type=energy